Dedicated winding machine for ignition coil


点火线圈专用绕线机.jpgMechanical properties:
High quality resin sand casting
The base plate is welded with steel plate, bearing large, reducing noise and reducing noise, and increasing the stability of the machine.
Imported guide rail and screw, to ensure that the positioning of the machine and the accuracy of repeated positioning
Each step of the assembly of high speed spindle passes through strict quality control, high speed, low noise and long service life.
Type of replacement is convenient, need to invoke the appropriate procedures and support can replace the fixture
Frame detection devices in place can be detected is not in place of the skeleton, and timely alarm and shutdown, ensure that the needle was not interrupted
Main configuration:
1, using the Japanese servo motor, imported silk, guide rail.
2, using the Japanese SMC cylinder, Japan's small gold wells pneumatic solenoid valve.
3, using the Japanese Kean fiber sensor, Japan's OMRON photoelectric switch, Japan SMC magnetic switch.
4, the main shaft using the Japanese NSK high speed bearings, the use of Japan's Samsung belt.

Specification parameter

Spindle spacing

100mm

Number of principal axis

6

Spindle direction

Clockwise/counter clockwise/360°

Spindle speed

8000rpm

D stroke

X:85 Y:85 Z:55

Spindle servo motor power

1500W

Applicable line diameter

0.02-0.6(Increasing the power of the motor can be applied to larger diameter)

supply voltage

 AC220V±10%

power

 2000W

Max frame outside diameter

 80mm

Quick clamp interface inner diameter

10mm

Guide pin rod moving servo motor power

 400(X) 400(Y) 400(Z)

Needle bar movement speed

50mm/s

Compressed air pressure

 0.4-0.6mpa

Host size

 1100mX1000mmX1550mm

Host weight

 1000kg


展开